Logo: Click To Skip To Home Page
If you have any questions or would like to place an order please call (302) 337-8285, or click on the link below to send an email to us.
Click Here To Email Goose Bay Workshops
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#1 (above)
Yes, it is HUGE! A bulk storage horn which came from Cutchogue Long Island, New York, with a verbal Rev. War provenance. It measures about 5 and 1/2 inches across the butt, and is about 27 inches long, with a 1/2 inch spout opening. it has nicely carved bands about 4 1/2 inches back from the spout. The butt plug is held by 20 brass headed tacks, about 5 are missing. This is a plain horn, no inscriptions, but it is Magnificient!! Butt has traces of 2 or 3 small nails.
Price $1000.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#2 (above)
An unusual horn, probably storage. Measures 3 X 3 and 3/4 across the butt. It is 15 inches long, with a mouth of about 5/8 inches. No nails in the butt, and a small ring carved just behind the spout. The initials "U", and possibly "M" are carved in the butt.
Price $100.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#3 (above)
Nicely worked spout on this horn mearuring about 2 and 1/2 across the butt, and about 12 1/2 inches long. Some damage at the spout, but really nice anyway. Butt is held with 4 iron nails and has a wood screw in the center.
Price $175.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
#4 (above)
Another bulk storage horn, this is old, with some damage, but unique in that the butt is held with 23 bone or ivory plugs, with a furniture pull as the cord holder. It is brass, and looks 17th century. Butt is 4 x 3 and 1/2 inches, overall length is about 19 inches. Spout hole is about 3/8 inch. Carving on the butt is not legible, probably a "V" so might be Virginia ...
Price $150.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
#5 (above)
A really crude horn with a really great repair. It measures about 2 and 1/2 X 3 and 1/4 at the butt which is held by 8 brass tacks amd has a staple in it to hang from a strap. Four copper wire stitches hold an old split together. About 13 inches long, witha 1/4 inch opening in a faceted spout, crudely carved in 9 facets.
Price $80.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#6 (above)
Probably a F&I period lobed horn, uncarved, but with a really unique spout treatment. The butt is 3 and 1/4 by 2 and 1/2, held with 4 nails made of wood, or thorn. Horn is about 12 inches long with an opening of 3/8 inch. Rough surface has seen some miles. Uncarved, but the real thing.
Price $ 500.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
Image:
#7 (above)
Yes, it is cracked, but it is also covered with faint carvings on the body as well as the butt. Slightly domed plug held with both iron and wood pegs, with a tack to hold a strap. About 3 inches at the butt, and 11 inches long with a spout opening of 3/8 inch. Floral, scrolls and hex symbols cover the surface.
Price $ 200.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#8 (above)
This is a pie crust horn, or a Virginia pie crust horn due to the spout carving. Butt is flat with 8 pegs, and with an iron staple for the strap. Butt is about 2 and 3/4 inches, length is about 10 inches, spout hole is 1/4". Slight bug damage, but a beautiful horn with great wear at both ends from the carrying strap.
Price $250.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#10 (above)
"CTS" or "GTS" carved on the butt, which measures 3 by 2 and 1/2 inches, is flat, and is held with 4 wood pegs. About 10 inches long with a spout opening of almost 1/2 inch.
Price $150.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
#11 (above)
Sharpening stone horn with both a belt hook of iron and an earth spike at the tip. Comes with an old stone. About 6 inches long. Typical example of a horn not too often seen.
Price $50.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#12 (above)
Nice smallish horn with a fern or tree carved on the side very faintly. Scraped quite thin, with a domed butt about 2 x 2 and 1/2 inches. Horn is about 8 inches long. The spout hole is 1/4 inch. 7 pegs of wood hold the butt.
Price $ 150.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#13 (above)
Nine iron pegs hold in a leather butt plug! Butt has a staple in the center. About 2 and 1/2 inches across and 6 inches long. Spout opening is a bit over 1/4 inch. Unique!
Price $ 75.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
Image:
#14 (above)
A neat little flat horn with a batch of initials carved on it. "A AZ" "AN" and "A" are carved on the sides. The domed plug measures 1 x 2 and 1/8 inches, held with 2 pegs and an iron wire loop. About 6 and 1/2 inches long with a spout hole of 1/4 inch. Two body splits do nothing to take away from the beauty of this little horn.
Price $ 150.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#15 (above)
Interesting horn, scraped really thin with a butt plug of about 2 and 3/4 inches, held with 4 square tacks, and 4 added small nails. Has an iron staple for the strap. Horn is about 8 inches long with a high relief tip and a 1/4 inch hole.
Price $75.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#16 (above)
Really nice Indian trade horn with the butt covered with coin silver. Measures about 2 and 1/2 inches, about 11 inches long with a flared spout hole of about 3/8 inch. Scraped thin with a nice patina.
Price $200.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
#17 (above)
A crude, chunky little horn. Pine plug with 3 iron nails and a typical wood screw as a strap attachment. About 1 and 3/4 by 2 and 1/4 by about 7 inches long. The spout hole is 1/4".
Price $ 50.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Image:
Image:
Image:
Image:
Image:
Image:
#20 (above)
A really unique horn, sort of a rum horn shape, but with the ends plugged with cork. One end is still in place, and is made of cork covered with tar. Has 3 iron pins and possibly a brass one. About 5 and 1/2 inches tall, tapering from a base of 2 and 3/4 inches to a top of 3 and 1/2 inches it is virtually covered with trees, birds, animals and people. This has been described to me as a possible 17th century salt or fire starting kit. The shory side of the curve would have had a leather strap. The open end would have had another tar covered cork plug. Probably from the Caribbean islands ... Tortuga, Barbadoes ... who knows. Repaired a bit, but still older than dirt. Gorgeous.
Price $ 800.00
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click Here To Email Goose Bay Workshops
Other pages:
This is the text-only version of this page. Click here to see this page with graphics.
Edit this page |
Manage website
Make Your Own Website: 2-Minute-Website.com